Instructions for using air conditioner remote controls of all types

The hot season is coming, the demand for air conditioning is increasing. How to use air conditioning most effectively to keep cool and save electricity? Please read the detailed instructions for using air conditioning remote controls below.

Instructions for using air conditioner remote controls of all types

Panasonic air conditioner remote control user manual

Important parts on Panasonic air conditioner remote control

The remote control of Panasonic air conditioner consists of 2 parts: display screen and function keys (power button, temperature adjustment button, timer button, quick cooling button, mode selection button, etc.).

How to use Panasonic air conditioner remote control

To control Panasonic air conditioner, follow the instructions for using the air conditioner remote control as follows:

- Start the air conditioner

First, start the device, press the ON/OFF button. When you see the POWER light on, the device is on.

When you want to turn off the air conditioner, press the ON/OFF button one more time, the air conditioner will stop working and slowly close the air conditioner fan blades.

- Set the modes

When you want to set the air conditioner modes, press the MODE button, then select the following modes:

Auto: Automatic temperature mode with maintenance level from 23 - 25 degrees Celsius.
Cool: Cooling mode.
Dry: Dehumidification mode, dries the room.
Fan: Activate the fan.
Heat: Heating mode.
E-ion/Ionizer: Air purifier, ion generator.
Quiet: Noise reduction function. If you want to cancel this mode after selecting, press 3 times.
Powerful: Fast cooling function.

Instructions for using air conditioner remote controls of all types - 1 — *Illustration*

- Temperature setting

If you want to set the temperature, press the TEMP button, select ▲ to increase the temperature and select ▼ to decrease the temperature. If you want to change from F to C, press and hold the down arrow in the TIMER box for about 10 seconds.

- Set fan mode

Panasonic air conditioners have 3 fan modes: high, low and medium. To adjust the fan mode, select the FAN SPEED button.

Low fan mode press once;
Medium fan mode press 2 times;
High fan mode press 3 times;
To return to auto mode press 4 times.

- Adjust wind direction

To adjust the wind direction of the Panasonic air conditioner, press the AIR SWING button, the wind vane will operate. Press the AIR SWING button again, the wind vane will stop at the desired position.

- Timer on Panasonic air conditioner

If you want to set the timer on the air conditioner, press the ON TIMER button, select the up or down arrow, select the ON TIMER button again if you want to increase/decrease the time.

LG S09EN3 air conditioner remote control user manual

Basic modes

LG S09EN3 air conditioner remote control has the following basic modes:

Dry mode (dehumidification mode): Once the air conditioner is turned on this mode, it will absorb all the moisture in your room and bring fresh air. Note that the fan speed is an automatic setting, so users cannot adjust it themselves.

Fan mode: When this mode is turned on, it will help cool with a fan, not a cooler. Its capacity is almost equal to a normal fan.

Auto mode: With this mode, users do not need to adjust many times, based on the temperature in the room, the air conditioner will automatically adjust and cool accordingly, thanks to the sensor thermometer inside the air conditioner.

Cool mode: Users can freely adjust the fan temperature, helping to bring cool air, no longer hot on summer days.

Adjust wind direction

To adjust the wind direction, press the MODE button on the remote control to turn on the mode. Next, adjust the room temperature by pressing the TEMP button. Then, press the SWING button on the remote control to adjust.

Fast cooling mode

To turn on the quick cooling mode, do the following:

Step 1: Press the MODE button to select the cooling mode for the air conditioner.

Step 2: Press the JET MODE button on the remote control. In this mode, the machine will run at the highest fan speed with a temperature of 18 degrees Celsius for 30 minutes.

Power saving operating mode

Press the ENERGY SAVING button, the machine will automatically increase the appropriate temperature to save maximum power consumption. Power saving mode also depends on how you adjust and use:

1 step: At this step, the power input will be reduced compared to the rated power input (20%).

2 steps: Compared to the rated power source, the power input is reduced by 40%.

3 steps (Optional steps): Compared with the rated power input, the power input is reduced by 60%.

Timer mode

To set the on/off timer on LG air conditioner, you can do the following:

Step 1: Press and hold the OFF TIMER button until the remote control shows ON.

Step 2: Use the 2 arrow buttons on the remote control to adjust the time you want.

Similar to the above step, to set the timer to turn off the air conditioner, select until the word OFF appears.

The most detailed instructions for using Nagakawa air conditioner remote control

Overview of remote features

ON/OFF button: Turn the machine on/off.

▼ or ▲ button: Increase or decrease temperature.

MODE key: Set the operating modes.

IONIZER button: Turn on/off Ionizer mode.

Time ON button: Turn on timer mode.

Time Off button: Turn off timer mode.

Fan Speed button: Adjust fan speed.

Swing button: Set the air swing.

Econ button: Energy saving function.

Sleep button: Sleep mode, used to automatically adjust the room temperature so that sleep is not affected, avoiding being too cold.

Reset button: Reset settings.

Louver button: Adjusts maximum cooling.

Basic modes

Below are some basic modes on Nagakawa air conditioners that you will often use:

You press the "ON" button, the air conditioner will start, the green light on the indoor unit will light up.

Select "MODE" and choose the modes you want to use to suit the weather in turn: Heating > dehumidifying > fan > cooling > AUTO.

To adjust the temperature, press "▲" to increase the temperature and "▼" to decrease the temperature. Each press will increase/decrease the temperature by 1 degree Celsius.

Press the "OFF" button and the machine will stop.

Adjust fan speed

You can adjust the fan speed by pressing the "FAN SPEED" button, which:

Press the FAN SPEED button once to select low fan mode.

Press the FAN SPEED button twice to select medium fan mode.

Press the FAN SPEED button 3 times to select high fan mode.

Press the FAN SPEED button 4 times to select auto fan mode.

Enable Sleep mode

SLEEP mode is very suitable for use at night for young children and the elderly to avoid colds and respiratory diseases.

If you select the mode when the air conditioner is cooling, in the first 2 hours, the air conditioner will automatically increase 1 degree Celsius/hour, then maintain that temperature until the machine is turned off.

If activated while the air conditioner is warming up, it will adjust the temperature down by 1 degree Celsius/30 minutes for the first 2 hours, then maintain this temperature until the machine is turned off.

Adjust the timer

Air conditioner timer

To set the air conditioner timer, you need to do the following:

Step 1: Press the TIMER ON button.

Step 2: Use the 2 up/down arrow buttons on the TIMER frame to increase/decrease the time you want to set.

Step 3: Press the TIMER ON button again to confirm the setting.

Air conditioner timer

To set the timer to turn off the air conditioner, do the following:

Step 1: Press the TIMER OFF button.

Step 2: Press the 2 up/down arrow buttons on the TIMER frame to increase/decrease the time you want to set.

Step 3: Press the TIMER OFF button again to confirm the setting.

Notes when using Nagakawa air conditioner remote control

Here are some notes you need to know when using Nagakawa air conditioner remote control:

When starting AUTO mode, the fan will run very gently for about 1 minute. During that time, the machine automatically detects the room temperature to decide on the appropriate operating mode.

Once the machine has selected a mode, that mode will not change when the room temperature changes.

When running in monitoring mode the fan runs very slow.

Within 2 hours after turning off the machine, if you turn it on, it will still work in the mode before turning it off.

Above are instructions for using air conditioner remote controls of all types. Hopefully this information will be useful to you.

Thanh Thanh (Synthesis)

Useful
Emotion
Creative
Unique
Wrath