5 programs to help identify SSD life

In fact, a modern SSD can last a lifetime, but knowing how much life an SSD has left can prevent it from going into read-only mode and reacting to problems too late. By being proactive and “better safe than sorry,” users can react before it becomes unusable. Here are five programs that can help you find out this information.

Aida64

The successor to the famous Everest is the most complete software designed to know the status of SSD hardware because it incorporates a lot of options. Among these options, it can help users know the remaining time of the SSD, at least in percentage. To do this, users just need to open the program and go to Storage > SMART, where users will find all the data they need.

Aida64 software interface

As shown in the screenshot provided, the SSD has been running for a total of 243 days (total hours of operation, not from the date of purchase). During that time, approximately 15.49 TB of data has been written. According to the data from the drive itself, it still has 96% of its life left, so there is nothing to worry about at this point.

CrystalDiskInfo

CrystalDiskInfo is a popular tool for finding out the status of any storage device, but the downside is that it doesn't tell us specifically how long an SSD will last. Instead, users have to calculate it themselves based on the data they receive.

CrystalDiskInfo software interface

As shown in the screenshot, the software shows that 15,860 GB have been written to the SSD. What we need to know is the TBW data of the device, and with this data, the user can do the math to know how much is left. For example, the drive has an endurance of 1,400 TBW, and since about 16 TB have been written, that equates to about 90% of the writes.

Based on the above data, it can be seen that each tool has a different way of calculating data and in the case of CrystalDiskInfo, it calculates based on the SSD specifications and not based on the actual data that the software reads.

SSDLife Pro

This software will give the user an approximate (or rather an estimate) of the SSD's lifespan. This calculation is based on its usage time and wear at the time of query execution, so it is quite accurate.

SSDLife Pro software interface

According to the screenshot, it tells the user that there are only 10 years left in life. This data is also different from what the above software does.

HWiNFO

HWiNFO is one of those programs that has been with hardware enthusiasts for years because it has the ability to get reports on all the PC hardware as well as measure all the device's sensors in real time. But for what the article is about, it will also help people know how much life their SSD has left.

HWiNFO software interface

To do this, the user will have to go to the Disk section and then search for his SSD depending on its type (in this case, NVMe). There, the user can see in the Device Status section the remaining usage time, which is calculated in a similar way to Aida64.

Hard Disk Sentinel

Finally, Hard Disk Sentinel is a program with a slightly old interface but does a pretty good job of finding out how much life your SSD has left.

Hard Disk Sentinel software interface

In this case, the program will tell the user the health status of the SSD in percentage, but it will also provide an estimate of the remaining usable life in the Estimated remaining lifetime section.

Source link: https://thanhnien.vn/5-chuong-trinh-giup-nhan-biet-tuoi-tho-ssd-185230423130032781.htm