Prolonged rain and flooding are potential risks that cause many cars to be flooded into the interior, stall in the middle of the road, or worse, be damaged by water hammer. In the case of water flooding into the interior compartment, the car's interior is also greatly affected, water seeps into the car, causing mold, dirt, and unpleasant odors.
Prolonged rain and flooding are potential risks that cause many cars to have water entering the interior and stalling in the middle of the road...
If not cleaned early, it will reduce the life of the furniture, the car will lose its value, not to mention it also has many potential health risks. In this article, Tinxe will guide readers on how to effectively "put out the fire" and handle water damage to the interior.
Professional interior cleaning
First, the driver needs to turn off the engine to avoid short circuits, ensure safety and make sure not to restart the car in flooded areas, find a way to get the car out of the flooded area safely. When leaving the flooded area, you quickly open all the doors to let the water out. You need to quickly remove all the water on the car.
In cases where the vehicle is flooded into the interior compartment, we recommend that you call a garage/service shop for professional and safe handling of the vehicle.
In case the car is flooded into the interior compartment, call a garage/service shop for professional and safe handling.
When repairing at the center, the repairman will remove the drainage holes in the floor, wash it with water and blow dry. In addition, the bottom support part of the car floor is made of metal and has a soundproof design, so it is very tight. If water gets in, it will form water compartments and cannot drain out by itself, which will cause the air conditioning duct to become dirty and clogged. The car floor needs to be removed and checked carefully, ensuring that all the water is sucked out.
After the water has been sucked out, the mechanic uses a dryer to dry the entire car, helping to clean and dry it, while also ensuring that the bolts and screws are not soaked in rainwater and rusted. That is why after cleaning the car floor, it is very important to apply anti-rust oil and grease to the metal parts. The electrical system and plugs running around the car also need to be checked and dried to prevent short circuits and fires.
After sucking out all the water, the mechanic uses a dryer to dry the entire vehicle, helping to clean and dry it, while also ensuring that the bolts and screws are not soaked in water.
After being flooded, the door will still contain a lot of water inside, affecting the operation of many other related parts, so they also need to be cleaned and inspected.
Next, heavily water-soaked parts such as seats need to be removed and cleaned separately with specialized chemicals.
"First aid" for home interior
In case water gets into the interior compartment due to rain, people sitting or bringing wet things into the car, causing the interior compartment to be damp, you can handle it at home. When parking at home, you can use a fan, a large dryer to dry it, or use another small trick: sprinkle baking soda directly on the seats and floor of the car to absorb moisture and deodorize the interior compartment. For floor mats, you can remove them, wash them and dry them.
After draining all the water, dry the car in a ventilated and sunny place, remember to open the car door to create air circulation, limiting mold. Wet items in the car need to be cleaned and completely dried.
The floor area, spare tire compartment, carpet and trunk also need to be carefully checked because these areas are prone to water stagnation, if not dried they will rust.
The floor area, spare tire compartment, carpet and trunk also need to be carefully checked because these areas are prone to water stagnation. If not dried, they will rust, creating conditions for mold to grow.
In addition, you need to check the holes to limit water from entering the car when driving in the rain or through flooded areas. For stubborn stains that are difficult to remove, you can spray white vinegar on them, leave for about 10 minutes, then clean and wipe with a towel.
Leather upholstery should avoid using highly abrasive detergents, only dry at room temperature, do not expose to strong sunlight. At the same time, car owners should use additional conditioner to increase the softness and shine of the leather surface.
Prevent mold
When you discover signs of mold in the interior, use a specialized cleaning solution or detergent to completely scrub away stains, dirt, and moldy areas. Be careful to do this gently so as not to scratch the interior or ruin the aesthetics of the car. In addition, car owners should use anti-mold powder to thoroughly treat mold, not giving it a chance to grow.
When you discover signs of mold on the interior, use a specialized cleaning solution or detergent to completely scrub away stains and dirt...
Car interiors are actually dirtier than you think, this place contains a lot of dirt, sand, smoke, bacteria, ... accumulated over time. Even if the car is not exposed to water, you should still clean the interior compartment 1-2 times/week. It can be done simply by using a vacuum cleaner and then wiping it clean with a towel. At least once a year, you should take your car to a "spa" for interior care to ensure the car's interior is clean, beautiful and safe for your health.
Source: https://khoahocdoisong.vn/cach-so-cuu-noi-that-oto-khi-ngap-nuoc-ma-chu-xe-nao-cung-can-biet-post2149048656.html
Comment (0)