502 glue is often used to stick peeling objects, highly applicable. However, during use, if not careful, it will stick to your hands and be very difficult to remove.
When your finger is stuck with glue, do not try to pull it off because it can easily tear and damage the skin. Use the 2 simple tips below to remove the glue on your skin.
Not knowing how to handle it will cause the skin area to be damaged by glue (Source: Aboluowang)
Soak your hands in warm water
If the 502 glue has just stuck to your finger and has not yet dried in the air, you can immediately soak your finger in warm water, then apply ice to let the glue come off. Usually, after soaking for a few minutes, the glue will gradually dissolve and your finger will slowly be able to be pulled out.
Use essential oils
Once the glue has dried and hardened, it will be more difficult to use the above method. Using essential oil to dissolve 502 glue is an effective way.
Apply the balm to the area of your finger that is stuck with glue and the skin on the edge of your finger. While applying, rub your finger so that the balm solution can penetrate into the gaps. After rubbing for a few minutes, the 502 glue on your finger will dissolve and be easily removed.
502 glue has the property of drying quickly, so you should be careful when using it, and store it carefully after use. It is best to wear gloves during use and mark the positions that need to be glued to avoid sticking it crookedly or pumping too much glue, causing it to stick to your hands.
If you have small children at home, keep the glue out of reach of children. Ko 502 is not only very sticky but also has a pungent, toxic chemical smell.
Thu Hien (Source: Aboluowang)
Source
Comment (0)